Eufy RoboVac Brush Not Spinning – Fixing Error S3

If you are experiencing an Error S3 when using your Eufy RoboVac, there are several steps you can take to get your robotic vacuum running again. Before you do anything, check your owner’s manual to ensure you are not wasting your time and money on the wrong solution.

The first step to solving your Error S3 is to test your robot’s performance. For instance, did you notice that it performed better when cleaning up a low pile carpet than a high pile carpet? It also works well on the dreaded kitty litter, cereal, and sugar mess.

One problem you can encounter with your robotic vacuum is that it will get stuck. This is especially troublesome if your floor is covered in thicker carpet. You will need to clear the path for the robot to operate properly.

A good starting point is to remove the side brushes from your robot. Once they are out of the way, you can give the housing a good cleaning. Remember to use warm water to make sure the bristles are clean. You may need to do this more than once to get all of the dirt out.

One trick to fixing your robot’s side brushes is to gently spin the brush in the correct direction. You can apply a little WD-40 to the brushes to help them rotate easily. Also, check the electrical connections to the motor to see if there is a problem.

Keeping the battery charged is important. This will ensure your robot is performing as it should when you aren’t around. As soon as you have a full charge, you can begin using it again. However, you should do this for at least a week before you perform any other maintenance.

In addition, you should be careful when charging your robot. Make sure you aren’t smacking the device on a high-pile carpet. Similarly, don’t forget to charge the base of your robot.

The Eufy RoboVac has two spinning brushes that are attached to the bottom of the unit. These brushes collect debris and fling it into corners where your vacuum can’t reach. When these bristles become bent or damaged, you may see a number of messes.

Some other features to look for include the rounded bumper of the eufy RoboVac, which protects the device and gives it an appealing aesthetic. Besides the usual dust cup, you will also find a release button to access the dust collector.

The eufy RoboVac has a small stature that allows it to move in tight spaces. Its small size also makes it easier to hide it from sight. To make the most of your new machine, keep it tidy and free of clutter. Keep your robot free of debris and you will be rewarded with a more pleasant cleaning experience.

While the Eufy RoboVac has many parts, a thorough maintenance routine will be able to prevent many of its more common problems. The above mentioned list should help you get your robot up and running again in no time.